DY2015 12V Automtive Battery System Tester Capacity Maximum Electronic load Battery Charge Test
DY2015 12V Automtive Battery System Tester fully diagnose status and electrical system of the car, get battery conclusion upon rich parameterWs measured, wrong-polarity-protected overload voltage protected.
What is DY2015 12V Automtive Battery System Tester ?
DY2015 series storage battery testers are used for activated style leadacid storage battery.
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection. Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery.
Feature of DY2015 12V Automtive Battery System Tester
- Conforms to CAT III 600V
- With large LCD display, easy to read the value
- Fully diagnose the battery status and car charging system
- Battery test: cold cranking amps, battery resistance, voltage, life analysis
- Engine system test: the change of battery system with the process of startup
- Charging system test: the charging system working state of the output
- Maximum load system test: the maximum load state of battery
- Rich Parameters measured and displayed for battery condition diagnose
- Overload protection and wrong connection protection keeps operator always safe
- Easily read out conclusion of battery condition good/OK/pay attention/replace
- Loose lead detection, unit conversion CCA/IEC/EN/DIN
DY2015 12V Automtive Battery System Tester’s Specification
|
specification |
Range |
|
CCA |
100~1700 |
|
IEC |
100~1000 |
|
EN |
100~1700 |
|
DIN |
100~1000 |
|
JIS |
Reference table in manual |
|
Displays Battery Internal Resistance |
Display ohms |
|
Displays Battery Voltage |
Display volts |
|
Displays Battery Condition |
good/OK/pay attention/replace |
|
Test 12V Batteries |
√ |
|
Battery Recharge Indicator |
√ |
|
Reverse Polarity Protection |
√ |
|
Detects and Displays Bad cell |
√ |
|
Loose Lead Detection |
√ |
|
Internal Unit Conversion EN,EIC,DIN |
√ |
|
Overload protection of input voltage |
√ |
|
Cable Length |
700mm |
|
Dimension |
180 * 90 * 32 mm |
|
Weight |
400 g |
Packing List
1 x DY2015 Car battery tester
1 x Pair test leads
